Submerged MBR PVDF Hollow Fiber membranes used in wasterwater treatment process

• Customization: Available
• Membrane Type: Hollow
• Type: UF
• Model NO.: SMU-30AP
• Membrane Material: Support layer:PET Separate layer:PVDF
• Effective Membrane Area(m2): 30
• Nominal Pore Size(um): 0.1
• outside diameter: 2.6/2.0mm
• Flow Path: Outside-in
• Usage: Municipal\Industrial\Water reuse
• Transport Package: Standard
• Specification: 824*2200
• Trademark: SHUIYI
• Origin: Made in China
• Production Capacity: 10000m2/Year
• Package Size: 82.40cm * 4.60cm * 220.00cm
• Package Gross Weight: 12.000kg

Product Description

SHUIYI Ultrafil^TM Series of Submerged Ultrafiltration Membrane is manufactured by the new technique of membrane composite production. According to the specific technique, the support layer and filtration layer are composed perfectly to form the hollow fiber membrane with high flux and high strength properties. The flat-plat membrane module should be merged in the membrane pool, that membrane system has a high integration degree with a good quality of final effluent.
SHUIYI Submerged Ultrafiltration Membrane is widely used in variable projects as municipal tap water, municipal water reuse and other types of reclaimed-water recycling. It can remove the suspended solid, Escherichia coli, Cryptosporidiosis and other microorganisms, and the handling result is more stable.

Product Characteristics

• Low energy cost, High efficiency

High membrane flux under low pressure, stably running under high pressure
The flux can be increased by 40% maximally, less demand of chemical agents.
High loading density, small footprint.

• Automatic discharge technology-Without mud adhesion

The hot melt adhesive discharge can orderly seal and discharge membrane filaments, efectively improving the anti-pollution performance of membrane components,reducing cleaning frequency, and promoting the water yield eficiency.
 

• Longer service life

As its high mechanical strength, the membrane is difficult to be broken
Permanent hydrophilicity of membranes makes the flux of system decays slowly.
 

• Running safely and reliably

Membrane has uniform pore diameter with high porosity factor.
Membrane has high peel strength, not easy to be peeled.

• High percentage ofopening-High flux

The percentage of opening pores of membrane filaments is high.ln normal temperature, the typical operation flux of MBR membranes is up to15-30LMH,with less membrane area, low investment in membrane systems for economic purposes.

Product Performance& Operation Parameters

Item			Parameters
			SMU-30AP
Characteristics Conditions	Effective Membrane Area		30 m^2
	Material		Supporting layer: PET Separating layer: PVDF
	Structure		Enhanced Outside to Inside Membrane
	Outer diameter of membrane fibers		2.6/2.0mm
	Nominal pore size		0.1 μm
	Delivery weight(dry)		12 kg
	Delivery weight(wet)		25Kg

 

Operating Parameters	Maximum backwash pressure	70 kPa
	Backwash flux(LMH)	20~50
	Operate Flux(LMH)^(1)	15~30
	Temperature	5~45ºC
	pH  range	2~10
	Aeration Intensity	60~120(Nm^3/m^2h shadow area)
	Chemical Cleaning pH Range	1~12
	MLSS	5000-10000mg/L
Permeate Quality ^(2)	Turbidity	≤0.8NTU
	SS	≤5 mg/L

Remarks: (1) Design and backwash flux depend on the operation and maintenance of the entire system.
                 (2) The product water index may vary slightly from the quality of feed water.